• Minncare® Test Strips

    Validated Peracetic Acid Test Strips

    Minncare Test Strips for Sterilant Concentration and Residual LevelsMinncare® Test Strips provide quick results with easy-to-read indicators. Minncare 1% TS Test Strips are used as a pass/fail measurement for adequate concentration of sterilant after dilution whilst Minncare Residual Test Strips are used to verify residual levels following rinse-out.

    Minncare 1% Test Strips

    Minncare 1% Test Strips verify adequate concentration of a 1% Minncare solution during sanitisation of your high purity water system. These convenient dip-and-read strips can be used at any test port in your system to provide an accurate pass/fail measurement of Minncare solution.

    Minncare Residual Test Strips

    Minncare Residual Test Strips are easy to use and are conveniently packaged 100 test strips per container. Each strip has a “reaction zone” pad located at one end of the strip. When stored and used properly, the test strip pad can indicate residual Minncare levels as low as 1 part per million (ppm). The reaction zones are set to provide six different reading levels at 100, 30, 10, 3, 1 and 0 (zero) parts per million.



    For more information about any of our decontamination products please complete our enquiry form or contact us.

    Download Cherwell's Guide to Cleanroom Decontamination

  • News

  • Events